(818) 318-0396

Monday - Friday: 7:00 am - 4:00 pm • Saturday: 7:00 am - 2:00 pm, 9824 Richmond Highway, Lorton, VA 22079 | (703) 339-8095 Let's assume a depth of 1 inch (1/12 ft). All Rights Reserved.

With the weight of the sand in the bag, sandbags with such dimensions and of this size can be used like bricks in building an interlocking sandbags wall.

Decide how thick the layer of sand will be. Note, we sell material by the ton and one (1) cubic yard is approximately 1.5 tons. Please be advised that the total calculated tons may differ from your actual requirement due to variances in sub-grade depth, compaction, material density, losses, etc.

Always consult the product label before applying any products. These calculators will convert an area or cylinder/circle shape into the total tons or cubic yards that you need.

Example: there is an area 20 feet by 10 feet and it needs to be 6 inches deep (see Depth Key Code). {{document.calc.yardage.value = Math.round((((document.calc.length.value * 1) * (document.calc.width.value * 1) / (27) / (document.calc.depth.value * 1)))*100)/100 }} This layer which supports these elements directly is usually paving sand. // -->. NOTE: Your Values are to be entered into the Calculator as "Feet" Not Inches. Use this paver sand calculator to solve for the amount of sand you need to create a stable layer under a pavement. function calcCompaction() Lawn Dork does not guarantee that the information on this site is accurate, current, or correct, and is therefore not liable for any loss resulting, directly or indirectly, from reliance upon this service.

Note: you must enter your Depth Key Code Value. A standard 14" x 26" sandbag or 18" x 30" sandbag can hold up to 50 pounds of sand, but we recommend filling the bag to 35-40 pounds of sand. Click "Calculate" button to calculate results. of 50 kg bag of cement, 0.42 m 3 of sand and 0.83 m 3 of stone aggregate. function calcYardage() This site offers lawn care information that is for educational purposes only.

{{document.calc.compaction.value = Math.round((((document.calc.yardage.value * 1) * (.20)) + (document.calc.yardage.value * 1))*100)/100 }} To Calculate Yardage needed for your project enter Length, Width, and Depth. Most gravel weighs 1.4 to 1.7 tons per cubic yard.

Ans.

Step Two: Calculate Weight in Tons. As a shortcut, try our cubic yardage calculator to conveniently calculate your volume. Example: there is an area 20 feet by 10 feet and it needs to be 6 inches deep (see Depth Key Code). GNA Sand and Gravel Cubic yard calculator for topsoil, sand, gravel, dirt. To Calculate Yardage needed for your project enter Length, Width, and Depth.. To use the calculator, select your stone or sand aggregate type from the pull down menu, and enter length, width, and depth requirements in the blanks provided. Do not rely on this site as a substitute or replacement for professional advice or the information contained on manufacturer official labels. Easily calculate a sand topdressing for your lawn or a golf course. Figure out how much sand in cubic feet, cubic yards, or tons with one click. into the "Yardage Calculator" for Correct Calculation. To use the calculator, select your stone or sand aggregate type from the pull down menu, and enter length, width, and depth requirements in the blanks provided. You can also type the area directly into our paver sand calculator. Materials required are 7 nos. Calculator.

Granular Broadcast Application Calculator. Calculate the square feet of an area by using the length width and depth.

Note: you must enter your Depth Key Code Value into the "Yardage Calculator" for Correct Calculation. Multiply the area by depth to find the volume of sand required: V = 161.5 ft^2 * 1/12 ft = 13.458 cu ft. CertainLabel™ Lawn Nutrient & Fertilizer Finder. Example calculation Estimate the quantity of cement, sand and stone aggregate required for 1 cubic meter of 1:2:4 concrete mix. This calculator will estimate how much stone and/or sand (in tons) that are required for your job based on your material type and measurements. How much do sandbags hold? Double-check your inputs. 10133 Giles Run Road, Lorton, VA 22079 | (703) 339-8096, Copyright 2019 Rock, Stone, & Sand Yard. Whether you’re planning to build an elaborate patio or a paved driveway, you must first create a strong foundation to lay your concrete or stone pavers on.

Our free Sand & Gravel Materials Calculators helps you to estimate the required sand or gravel weight for a job.

Armed with the volume of material needed in cubic yards, the weight of material in tons can be found by multiplying the volume by the material density. This calculator will estimate how much stone and/or sand (in tons) that are required for your job based on your material type and measurements. Aggregate Calculator.